4 Best AC Clutch Removal Tool: Options Compared

Replacing an AC compressor clutch can be a frustrating job without the right tool. You need something that holds the clutch plate securely while you loosen or tighten the pulley bolt.

This guide compares four different AC clutch removal tools to help you choose the one that fits your vehicle and skill level. Whether you need a simple holding tool or a complete master kit, you’ll find a clear option here.

DPTOOL Air Conditioner Clutch Holding Tool Set – Versatile Kit

The DPTOOL kit is designed specifically for removing and installing AC compressor clutches on a wide range of vehicles, including GM, Chevy, Chrysler, Subaru, and Volvo. It includes a holding tool, an install tool, and multiple threads to attach to the inner clutch shaft. This makes it a practical choice if you work on different car brands and need a complete set in one box.

One important detail to note is that this kit does not fit the F150 with an F10 compressor, so you should verify your compressor type before purchasing. The tools are built to hold the clutch plate firmly while you apply torque, which helps prevent damage to the compressor. If you regularly service AC clutches on the supported vehicles, this kit offers good value and convenience.

View all product features

• Repairs A/C Compressor: design for remove and install AC compressor clutches,used to hold the AC compressor clutch plate while loosening and tightening the pulley mounting bolt, and you should line up tool with clutch plate before you put the clutch plate on the compressor
• Much Needed Tool for Change Air Conditioner Compressor Clutches: AC clutch tool a must have if you are working on clutch replacement on the AC compressor, you can repair A/C clutch by youself, remove two shims, this fixing your AC and saving much dollars needn't replaced the whole compressor/clutch, or air conditioner is repaired at a far smaller price than the repair shop wanted
• Applicable: This kit fit different vehicles, include compatible with GM/Chevy/Chrysler/Subaru/Volvo ect, but not fit F150 with F 10 compressor
• Kit: This kit include air conditioner clutch holding tool, install tool, and different threads used to attach to inner clutch shaft when removing, have everything you need to service various AC clutches
• Sturdy A/C Clutch Remove Tool: the tool made of high quality steel, not that flimsy steel, the exterior has a black anti-rust coating to extend longevity, and we offer 12 months warranty, if the tool have any quality problem, we will refund or replace

---

Powerbuilt AC Clutch Holding Tool – Adjustable and Durable

The Powerbuilt 648980 is a standalone holding tool with adjustable pins and brass adjuster nuts, allowing you to fit most AC compressor clutch designs. Its heat-treated stamped steel construction gives it the strength needed for repeated use in a home garage or professional shop. The rubberized vinyl handle provides a secure, comfortable grip, which helps you maintain control during the job.

This tool is ideal if you already have a puller or installer and just need a reliable way to hold the clutch plate. The adjustable pin spacing means you can adapt it to different clutch sizes without needing multiple tools. While it doesn’t come with adapters or a case, its simplicity and build quality make it a dependable choice for straightforward clutch removal and installation tasks.

View all product features

• Versatile Clutch Holding Design – Features adjustable holding pins and brass adjuster nuts, making it suitable for removing and installing AC compressor clutches on a wide range of domestic and import vehicles.
• Built for Strength and Durability – Constructed from heat-treated stamped steel for long-lasting performance in demanding automotive repair environments.
• Safe, Comfortable Handling – Rubberized vinyl non-slip handle provides a secure grip and better control during clutch service operations.
• Adjustable for Easy Fitment – Pin spacing adjusts easily to accommodate most air conditioning compressor clutch designs and sizes.
• Convenient In-Vehicle Service – Designed to service AC compressor clutches while the compressor remains installed, saving time and simplifying repairs.

---

Generic A/C Compressor Clutch Remover Kit – Budget Puller Set

This generic kit focuses on removing and rebuilding AC clutch assemblies. It includes a puller with both smooth and threaded sides, plus 2- and 3-jaw puller plates. The stainless steel construction with a black coated finish resists rust and corrosion when properly maintained. You’ll need to keep all threads clean and oiled for smooth operation.

The kit is straightforward: you attach the threaded side to the inner clutch shaft and use the puller to remove the clutch. It’s a budget-friendly option if you mainly need a puller and already have a separate holding tool. The instructions suggest starting with one bearing, so take your time to avoid damaging the clutch. For occasional use on a single vehicle, this set can get the job done without a large investment.

View all product features

• REPLACE A/C CLUTCH ASSEMBLY: Use the Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors; GM R4 and A6, HR-6, DA-6 and V A/C compressors; sander compressors SD 505, 507, 575, 708, and 709; Wide application of vehicles Check vehicle owner’s manual for a list of compatible compressors
• Keep all threads clean and well-oiled; Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing); Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part – inner bolt does not move when threading down outer piece); Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley
• Constructed from stainless steel with a black coated finish for ultimate strength and longevity; Resists rust and corrosion with proper care and lubrication; 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches

---

Powerbuilt Master AC Clutch Removal & Installation Tool Kit – Complete Set

The Powerbuilt 647756 is a 23-piece master kit designed for servicing automotive AC compressor clutches. It includes a holding tool, installer, remover, and a large selection of adapters to cover many makes and models. This is the most complete AC service kit on the market today, according to the manufacturer, and it comes in a heavy-duty blow-molded case for organized storage.

If you work on multiple vehicles or plan to service AC clutches professionally, this kit saves you from buying separate tools for each job. The wide adapter selection means you can handle different clutch shaft sizes and designs without guesswork. The blow-molded case keeps everything tidy and easy to transport. While it costs more than simpler options, the convenience and coverage make it a worthwhile investment for serious DIYers or mechanics.

View all product features

• Designed For Servicing Automotive A/C Compressor Clutches
• Large Selection of Adapters Included To Cover Many Makes and Models
• Most Complete A/C Service Kit on The Market Today
• Includes Heavy Duty Blow Molded Case
• Kit includes usage instruction with photos

---

Buyer’s Guide: What to Consider

Choosing the right AC clutch removal tool depends on your vehicle and how often you work on clutches. Here are five key factors to consider.

• Tool Type: Decide if you need a holding tool, puller, installer, or a combined kit. Holding tools secure the clutch plate; pullers remove it.
• Vehicle Compatibility: Check that the tool fits your compressor model. Some kits list specific makes like GM or Chrysler, while others are more universal.
• Build Quality: Look for heat-treated steel or stainless steel construction. Durable materials resist bending and corrosion during repeated use.
• Included Accessories: Kits with multiple adapters and threads cover more vehicles. A blow-molded case helps keep parts organized and protected.
• Ease of Use: Adjustable pins and non-slip handles make the job easier. Clear instructions and simple assembly reduce frustration.

Conclusion

Each of these four AC clutch removal tools serves a different need. The DPTOOL kit is great for multi-brand work, while the Powerbuilt holding tool is simple and durable. The generic puller set works on a budget, and the Powerbuilt master kit covers almost everything.

For most DIYers, the Powerbuilt master kit offers the best value and convenience. If you only need a holding tool, the adjustable Powerbuilt model is a reliable choice. Pick the one that matches your compressor type and how often you plan to use it.