When you need to replace or upgrade your trailer’s suspension, choosing the right 3500 lb trailer axle kit can make all the difference in performance and safety. Whether you’re hauling a boat, utility trailer, or camper, the components you select must work together seamlessly.
This guide reviews five essential kits, from electric brake assemblies to leaf spring suspensions and hub bearing sets. Each product is examined for its specific features and best use, helping you make an informed decision for your trailer project.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED “AS IS” AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Product comparison details are temporarily unavailable. Please check again shortly.
SEHNSUCHT Electric Brake Kit – Reliable Stopping Power
This pair of brake drums from SEHNSUCHT is built for 3500 lb axles with a 5 on 4.5-inch bolt circle. The 10-inch by 2.25-inch self-adjusting electric brakes use high-quality iron with electroplating to resist corrosion, so they perform reliably in wet or dusty conditions. You get two drums, plus inner bearing races for L68149 and L44649 bearings, making it a near-complete replacement for your brake assembly.
Installation is straightforward if you have basic mechanical skills, and the self-adjusting mechanism saves you from manual adjustments over time. Keep in mind this kit is not for 4400 lb axles, so verify your axle rating first. For a dependable electric brake upgrade on a standard 3500 lb trailer, this set delivers consistent stopping power.
- Self-adjusting brakes
- Corrosion-resistant coating
- Includes bearing races
- Not for 4400 lb axles
- Drums only, no hubs
View all product features
- Premium Material: This brake drum is made of high-quality iron and uses electroplating technology to protect the drum body, enabling it to work normally in various environments. At the same time, the brake drum is resistant to rust and corrosion, greatly extending the service life of the product.
- About The Drum and Self-Adjusting Electric Brakes: Classic design and rich production experience make the brake drum more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer. It’s designed for 3500 lb Axles.
- Package Including: 2*brake drum 5 hole, 4.5" bolt, 2*Bearing inner ring replace for L68149( I.D:1.377", O.D:2.164"), 2*Bearing inner ring replace for L44649(I.D:1.062", O.D:2.058"), 2*grease seal(I.D: 1.718" O.D: 2.56" height: 0.5" ), 2*dust cover(Mounting diameter:1.988"), 2*rubber plug dust cover(Mounting diameter:1.988"), 10*hub nut(1/2-20 UNF-2B), 1*left electric brake, 1*right electric brake, 8*spring washer, 8*nut, 2* hexagon slotted nut, 2*flat washer, 2* cotter pin.
- Suit for: Pair of trailer 5 on 4.5" hub drum kits and 10" x 2 1/4" electric adjusting brakes fit for Dexter and other brands 3500lbs trailer axle. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer. Not fit for 1-1/16" Straight spindle and 1" Straight spindle.
- After Sale Service: High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.
- Note:This brake drum is not fit for Nev-R-Lube AXLE,and not fit for Airstream Classic trailer(built after july 2005),Only fit for standard Lube AXLE.This product is not compatible with dexter 4400lb brake backplane.The dust cap needs to be installed by hammering.Please measure the size of the brake flange before installation.
SEHNSUCHT 4-Leaf Spring Kit – Tandem Suspension Upgrade
This suspension kit from SEHNSUCHT includes four leaf springs rated at 1750 lbs each, perfect for a 3500 lb tandem axle setup. The springs measure 25.25 inches eye-to-eye with a 3-inch free arch and 1.75-inch width, made from heavy-duty carbon steel with an anti-rust coating. Along with the springs, you get U-bolts, tie plates, hangers, and equalizers—everything needed to replace a worn SW4B-style suspension.
The double-eye design provides stable load distribution and friction damping, which smooths out rough roads. Installation requires some mechanical know-how, but the kit is complete with hardware. If your trailer’s leaf springs are sagging or broken, this all-in-one kit is a practical choice for restoring ride quality and load capacity.
- Complete hardware included
- Anti-rust coating
- Heavy-duty carbon steel
- Specific to double-eye springs
- No installation guide
View all product features
- About The Springs: Each spring offer 1,750lbs capacity, suit for standard 3,500lbs trailer axle. Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, 2 Bushings Installed for Each Spring, Leaf Thickness 5/16 inch. NOTE: The nut should be tightened horizontally. Failure to do so will affect the final user experience.
- About The Replacement: It will replace for SW4B. The Leaf Springs Made of Heavy Duty Carbon Steel for transmission stability and friction damping, Extra added anti-rust coating for corrosion resistance and long-lasting performance.
- About The Axle U-bolt Kit: This kit include 4 x 5-1/2" long U bolts, U-bolt thread diameter is 1/2",the curvature (inside diameter) of the U-bolt is 2 4/9"; 2 x tie plates for 1-3/4" leaf springs; 8 x 1/2"-20 hex nuts. And this kit used for 2-3/8" dia round trailer axles.(This product offer 2* U-bolt kit).
- About The Trailer Axle Hanger Kit: This kit include 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts. And this kit used for 1-3/4" leaf springs.
- After-sales service: Any questions after receiving, please contact us freely. Thanks for choosing us!
Dreamdragon Tandem Suspension Kit – Smooth Ride Solution
Dreamdragon’s tandem suspension kit is designed for 3500 lb axles, with each of the four leaf springs supporting 1750 lbs. The springs have a 25.25-inch eye-to-eye length, 3-inch free arch, and 1.75-inch width, with a 9/16-inch bushing diameter for smooth articulation. The kit includes U-bolts sized for a 2.375-inch round axle, plus equalizers, hangers, shackle straps, and all necessary hardware.
This set is ideal for light to medium-duty trailers, offering dependable support without excessive stiffness. The included accessory pack—14 pieces of hardware—simplifies installation, though you’ll still need basic tools. If you’re rebuilding a tandem axle suspension from scratch, this kit provides everything in one box.
- All hardware included
- Smooth bushing design
- Good for medium loads
- No installation instructions
- Springs may need lubrication
View all product features
- Each Trailer Leaf Spring is rated for 1,750 lbs, making it an ideal choice for standard 3,500 lbs trailer axles, providing dependable suspension support for light to medium-duty trailers.
- Featuring a 25-1/4" eye-to-eye length, 3" free open height, and 1-3/4" leaf width, this 4-leaf spring with 9/16" bushing diameter offers both durability and smooth operation.
- The kit includes a U-bolt set designed for 3,500 lbs axles with a 2-3/8" diameter round axle, consisting of 4 U-bolts (5-1/2" long, 1/2" dia.), 2 tie plates for 1-3/4" leaf springs, and 8 hex nuts for easy installation.
- Accessory Kit: 4pcs 4 leaf springs, 2pcs equalizers, 6pcs tall hanger, 8pcs shackle straps, 14pcs long shackle bolts and locknuts, 8pcs long U bolts, 16pcs hex nuts, 4pcs tie plates for leaf springs
- Trailer Leaf Spring Note! These leaf springs kit are ONLY designed for the trailer. Any questions after receiving Trailer Axle Suspension Kit , please contact us freely
iBroPrat 2-Pack Hub Kit – Idler Axle Hub Upgrade
This iBroPrat hub kit includes two hubs with a 5 on 4.5-inch bolt pattern, designed for 3500 lb trailer idler axles with #84 tapered spindles. Each hub has a diameter of 6.34 inches and comes with L44649 outer bearings and L68149 inner bearings, plus 10 lug nuts. The kit also includes extra dust caps and 32 accessory pieces, making it a luxury set for a complete hub replacement.
These hubs fit 1.0625-inch to 1.375-inch spindles but are not for straight spindles, so measure your axle carefully. The included bearings are pre-greased, saving you time during installation. For a straightforward idler axle hub swap on a 3500 lb trailer, this kit offers great value with all the small parts you need.
- Includes bearings and seals
- Extra dust caps
- Pre-greased bearings
- Not for straight spindles
- Lug nuts not pre-installed
View all product features
- 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Tapered Spindle,Not FIT on straight spindles.Fits L44649 outer bearings (I.D: 1-1/16''),L68149 inner bearings (I.D: 1-3/8'').Not FIT for inner and outer bearings of the same size as L44649 (I.D: 1-1/16'‘) or L44643 (I.D: 1’').
- 【HOW TO MEASURE BOLT PATTERN】LENGTH A-5 lug is from the OUTERMOST point of a hole to the CENTER of the second hole.LENGTH D-The Center of hole to the center of the bolt hole next to it.if the length A of measurement is 4.5", the length D of measurement is 2-5/8" and as there are 5 lugs, then the bolt pattern is 5×4.5".From the CENTER of a hole to the CENTER of the second hole, THIS IS THE WRONG WAY TO MEASURE. If you do not know how to measure, please refer to image 3.
- 【SIZE & QUANTITY】2PCS Hubs(5 bolt 4.5 for 3500lb Diameter 6.34"), 2PCS L44649 outer bearings (I.D: 1-1/16''), 2PCS L68149 inner bearings (I.D: 1-3/8''), 10PCS Lug nuts (1/2''-20 thread), 2PCS Washer(I.D: 1"), 2PCS Spindle nuts(I.D: 1"), 2PCS Grease seals (171255TB, 1.719'' I.D), 2PCS Cotter Pins(L: 2.25"), 4PCS Dust caps (O.D: 1.98''), 4PCS Plugs (2.56" O.D – 1.72" I.D). IF THE HUB DIAMETER IS 5.6", and the inner and outer bearings are of the same size,IT WILL NOT FIT. Please check the image 2.
- 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS.
- 【HIGH QUALITY】Strictly following the U.S. G3000 standard, the hub is made of high-quality carbon steel with anti-rust surface treatment; the bearing is made of high-quality bearing steel with precision bearings for low working noise; the grease seal adopts a double-lip design for no leakage.17.2 pounds also shows how heavy it is.
DEEPDREAM 4-Set Bearing Kit – Value Pack for Maintenance
DEEPDREAM’s bearing kit provides four complete sets of L68149 and L44649 bearings with their races, plus grease seals, spindle nuts, and dust caps. This pack is designed for 3500 lb trailer axles with #84 spindles, covering both inner and outer bearing positions. The bearings are made from chrome steel for durability and low noise during operation.
With 40 pieces in total, this kit is ideal for servicing multiple trailers or keeping spares on hand. The included 171255TB grease seals have a 1.72-inch inner diameter and 2.56-inch outer diameter, fitting common axle setups. If you need to repack bearings or replace worn ones, this value pack saves money compared to buying individual sets.
- Four complete sets
- Chrome steel bearings
- Includes seals and nuts
- No installation tool
- Seals may vary by axle
View all product features
- 【Fit】The trailer wheel bearing kit fits 3500lbs 1-1/16'' (L68149/L6811 bearings)to 1-3/8'' (L44649/l44610 bearings) trailer axles, spindle #84.
- 【Great Value Pack】These 4 sets trailer bearings kits include 40Pcs parts: 4pcs L68149 bearings + 4pcs L68111 races, 4pcs L44649 bearings + 4pcs L44610 races, 4pcs 171255TB grease seals, 4pcs spindle nuts, 4pcs shaft washers, 4pcs cotter pins, 4pcs dust caps, 4pcs rubber plugs.
- 【Size】Boat trailer bearings + races l68149x4,l68111x4 (1-3/8"),bearings + races l44649x4,l44610x4 (1-1/16"),4pcs 171255TB grease seals(1.72''id,2.56"od),4pcs spindle nuts(1"),4pcs shaft washers(1''),4pcs cotter pins(2.4''),4pcs dust caps(1.98"),4pcs rubber plugs(1.18").
- 【High Quality Material】3500 lb trailer wheel bearings Made of high quality chrome steel bearings, sturdy and durable, low working noise and has been tested many times before sale. Double lip grease seal to prevent leakage.
- 【Function】Trailer axle bearing kit Installing the kit on your trailer axle,which can help reduce friction and make rotation smoother, protect the parts that support rotation and maintain the correct position of the rotation axis and provide excellent support for the spindle.
Buyer’s Guide: What to Consider
Selecting the right 3500 lb trailer axle kit involves matching components to your axle type, brake system, and suspension design. Here are key factors to consider.
- Axle Rating and Compatibility: Ensure the kit matches your trailer's 3500 lb axle rating and spindle type. Tapered spindles require specific hubs and bearings.
- Brake Type and Size: Choose between electric or idler hubs. Electric brakes need proper wiring and a controller. Drum size must match your wheels.
- Spring Specifications: Leaf springs must have the correct eye-to-eye length, width, and capacity. Double-eye springs are common for tandem axles.
- Bolt Pattern and Hub Dimensions: Measure your wheel's bolt pattern (e.g., 5 on 4.5 inches) and hub diameter. Incorrect sizing leads to fitment issues.
- Hardware and Accessories Included: Kits with U-bolts, hangers, bearings, and seals save time. Verify all components are present before starting installation.
Conclusion
Choosing the best 3500 lb trailer axle kit depends on your specific needs—whether you’re replacing electric brakes, upgrading leaf springs, or servicing hubs and bearings. Each product reviewed here targets a different aspect of your trailer’s running gear.
For a complete brake drum set, the SEHNSUCHT electric brake kit stands out. If you need a full suspension overhaul, the Dreamdragon tandem kit offers great value. Always verify compatibility with your axle and spindle before purchasing.




